James Bond DB5 (10262) - Final Thoughts

Well, with the completion of the build comes time for reflection. Lego did a great job with this set. Visually, it looks very close to the real life version of the car. And the little tricks and gimmicks they included were well executed and true to the movies.

My favorite of the features has to be the ejection seat - the mechanics were cleverly integrated into the vehicle and work so smoothly. The seat gets some very impressive air when launched - it had to be at least a foot of travel.

Other neat gadgets include the extendable bullet shield, the hidden machine guns that rotate in and out with the running lights and the rotating license plate holders. I was also very impressed with the detail in the engine of the car.

If there is something I need to pick on as a critique, it is that the retractable roof segment does not sit perfectly flush with the rest of the roof. So, if you know what you are looking for, it's quite evident that there is something going on there. You can see in the picture below that there is a square that seems to be slightly elevated from the roof.

Aside from that though, this build is spot on. It's full of interesting gadgets and features and it is a MUST HAVE for any James Bond fan. Be aware that novice builders may have difficulty though. Lego wasn't joking around when they classified this as an expert set. As with many other builds that have a lot of moving parts, some portions of the build are tricky and if you aren't paying complete attention, it is very easy to miss something only to realize it later and have a lengthy fix ahead of you.

James Bond DB5 (10262) - Off the assembly line and ready for action!

This weekend proved to be a productive one as we finished off the James Bond DB5. I presented it to Dave not too long ago and he was thoroughly pleased with it!

Lego certainly saved the best for last as we got to build (and play with) the ejection seat. It launches the seat an impressive distance into the air! It's also very easy to reload the seat and reset the roof for the next unfortunate passenger.

A significant portion of the roof folds away, leaving lots of room for the seat and its occupant to take a little ride. The mechanics are very fluid - pulling back on the activation lever (which is cleverly hidden as part of the bumper) retracts the roof while pushing it back into position launches the seat into the air.

We also installed the tire shredders onto one side of the vehicle - they sure do look menacing!

This is going to look great on display at Dave's house. I can't wait to see pictures of it on his TV stand!

And Dave, remember that if you ever decide to expand your Lego collection in any way, we are happy to help you out! Tell your friends!

James Bond DB5 (10262) - The Hood and Trunk Go On

We did a little more work on this last, getting the hood and the trunk on. It is really starting to look like a car now!

Here is a shot from the front - clearly recognizable is the Aston Martin logo on the prow of the hood as well as the air scoop that runs down the middle.

True to form to its real-life counterpart, the hood opens from the "back", swiveling at the front end. The opening and closing mechanism is very smooth and the hood stays open on its own.

We also did some work on the rear end of the car, getting the trunk in. Again the Aston Martin logo is prominently displayed.

As with the license plate holder on the front of the car, the one on the rear is also capable of flipping through all 4 of the plates. Below is a shot of it in mid change.

The trunk (or boot as the Brits would call it) is quite spacious. The only things currently in the trunk are 2 black pieces - I am not sure what they meant to be but they are the same pieces as those used on the machine guns. Perhaps they are replacement barrels?

Last but not least is the bullet shield - highly useful when Bond is being chased by the bad guys. With a clockwise twist of the right side "tailpipe", the shield extends to cover the rear windshield. Twist the pipe counter-clockwise and it retracts back into its slot.

James Bond DB5 (10262) - Engine, headlights and machine guns oh my!

This weekend's building unveiled more cool features of the Bond car. In addition to completing the engine compartment - which includes a pretty good depiction of the engine block, we also completed the front end of the car, including the grill and the running lights/machine guns.

As you can see, the engine compartment is convincingly packed with complex looking machinery. The engine even has the pistons showing and is a pretty good rendition of the inline-6 engine of the actual DB5 car. On the right side of the engine block, you can see the 6 headers of the exhaust manifold (again cannon to the real life DB5) and to the left are the 3 fuel filters and associated connections to the engine block. 

I certainly hope I have identified these components correctly as I am definitely not a gear head!

Next on the cool list are the running lights, which flip to reveal dual machine guns! Definitely handy in a villain chase! The flipping is accomplished using the gear shift lever by the driver's seat. Here is the car in "civilian" mode, looking perfectly harmless.

And then suddenly BAM! You've got twin machine guns spitting lead at you!

With that, we finished chapter 3 of the build. Chapter 4 is the last section, so expect a few more cool tricks that this car up its sleeve!

James Bond DB5 (10262) - Firewall and front bumper

Another of the cool Bond car features was unveiled to us last night as we assembled the front bumper. It turns out that the license plate sits on a rectangular structure that swivels, allowing the drive to switch between 4 different license plates!

In the below picture, I have positioned the swiveling plate in between 2 positions to showcase its operation. You can see it is transitioning between the classic British BMT 216 A plate and the French 4711-EA-62 plate.

Here is a shot with the English plate on full display. Other plate options include the Swiss plate LU 6789 and a James Bond vanity plate JB-007. Similar to the rear bumper, there is also a lot of chrome in use, adding to the "bling" factor.

We also added in the firewall last night, although this is harder to see and altogether far less interesting and exciting than the revolving license plate.

James Bond DB5 (10262) - Body Panels Going On

After a prolonged wait, our missing pieces finally arrived on Friday. Naturally, we got down to work over the weekend, putting in some of the interior (driver's seat and steering column) as well as some of the body work.

The rear quarter panels and doors all went on, as well as some of the detailing on the back end of the car.

You can see the chromed detailing on the rear bumper as well as the rear lights. The chromed pieces wrap around each side of the vehicle as well.

Both doors swing wide open easily. There is a little bit of a catch when trying to close the doors. I think this is in part to ensure that the doors don't open too easily (don't want them just swinging open on their own) and partly due to the thickness of the door. To achieve a perfectly smooth closing motion would have required the spacing between the door frame and the B-pillar to be eye-catchingly large.

There is a hidden compartment located in the driver's side door. The secret panel flips down to reveal a secret phone - it's red so it must be really important!

James Bond DB5 (10262) - License to Build

I received a follow-up parcel from Lego yesterday (no, not with the missing pieces) that held a plastic card - apparently, my License to Build.

The front of the card has blank areas where you write your name and then sign. The serial number at the bottom left of the card is unique, which adds to the collectability of this set. Also on the front is a picture of the Lego model and the 007 and Aston Martin logos.

The back gives details of the set, including the set number, name and piece count. The set is again pictured, this time with a front view.

James Bond DB5 (10262) - Missing Parts!

So we sat down to start Chapter 2 last night only to discover ON THE VERY FIRST STEP that there were FOUR missing pieces!!! As always, Lego's customer service was very pleasant and easy to deal with but that doesn't make the 2 week wait for replacement parts any easier.

I don't know what the percentage of sets with missing pieces is but quite a few of our latest builds seem to have had a few pieces missing. I guess that isn't too surprising considering how many thousands of pieces there are scattered over the hundreds of sets in circulation.

We toyed with the idea of starting a different build until the pieces arrive for this one but we haven't got enough space to do that, so we decided we would just use the 2 weeks as a bit of a break from Lego. It will make it that much more enjoyable when we get back into it.

James Bond DB5 (10262) - Laying Down The Chassis

We started the DB5 over the weekend and finished off the first chapter. I think the chassis and some of the gearing is all done but it still doesn't look too much like a car yet. As with any of the builds that involve a lot of mechanical components and gearing, it was pretty challenging to make sure everything was aligned and (of course) put into the correct place.

Below is what the car looks like at the end of the first chapter. The front of the vehicle is to the left (I think!!).

You can see the gear shift lever in the middle of the car, connected to the drive shaft. The section towards the rear of the vehicle contains the gearing for the ejection seat.

We nearly had a crisis moment when we discovered that mom had put the front wheel drive axles in backwards (they kept sliding out because she had inserted them with the lodging plate facing outwards instead of inwards where subsequent parts would pin them in place). Luckily, we were able to correct the error without having to disassemble and reassemble everything.

I believe that Chapter 2 does start on some of the body panels, so this will begin looking much more like a car soon!

James Bond DB5 Aston Martin (10262) - Our Next Build!

Our next project is an un-anticipated one. We had planned on continuing with the Ninjago theme and tackling the Temple of Ninjitsu next but my coworker asked if we could build the new James Bond DB5 for him. He is a huge James Bond fan and is planning on displaying this on his TV stand.

We will be starting this once Destiny's Bounty is complete. Neither of us are huge car enthusiasts, which is why we have not built any of the car sets, but this one definitely has some fun features. There are swiveling machine guns built into the car, a working ejection seat, and a bullet proof panel that pops up from the trunk among other things.

It is definitely going to make a great collectible for James Bond fans. And heck, you never know, it may just change our opinion on car sets. Maybe one of our future builds will be the new Bugatti Chiron!